From high-rise frames to bridge decking and precast concrete — Canco supplies construction-grade fasteners to contractors and project buyers across 70+ countries.
OUR ROLE
Construction projects demand fasteners that perform under load – consistently, across thousands of pieces. A bolt that fails a dimensional check on site costs far more than its replacement. Canco's construction fasteners are manufactured to drawing, inspected in batch, and shipped with documentation your QC team can actually use.
We supply directly to project procurement teams, construction companies, and fastener distributors — both domestically in India and for export across the Middle East, Southeast Asia, Africa, and Europe.
WHAT WE SUPPLY
| PRODUCT | SPEC / GRADE | TYPICAL APPLICATION | MATERIAL |
|---|---|---|---|
| Hex Bolts & Nuts | M6–M48, Grade 4.6 / 8.8 / 10.9, IS 1364, DIN 931/934 | Structural steel connections, frame bolting | Carbon Steel |
| Foundation Anchor Bolts | M12–M64, custom lengths, L-type, J-type, straight with plate | Column base plates, machinery foundations, precast pockets | Carbon Steel SS 304 |
| High-Tensile Bolts (HSFG) | Grade 8.8 / 10.9 / 12.9, IS 3757, IS 6623 | High-load structural connections, bridges | Alloy Steel |
| Threaded Rods & Studs | M6–M36, full / part thread, Custom lengths to 3000mm | Formwork tie rods, suspended slabs, façade brackets | Carbon Steel SS 304 SS 316 |
| U-Bolts | Custom sizes and bend radius, Round and square bend | Pipe clamps, cable trays, structural supports | Carbon Steel SS 316 |
| Flat & Spring Washers | M6–M48, DIN 125 / DIN 127, Standard and heavy pattern | Load distribution under bolt heads and nuts | Carbon Steel SS 304 |
| Coach Screws / Lag Bolts | M8–M20, various lengths | Timber connections, decking, formwork | Carbon Steel HDG |
| Chemical Anchor Studs | Specify sizes on request | Post-installed anchors in hardened concrete | SS 304 Carbon Steel |
* Representative list. Custom sizes, grades, and finishes available on request.
APPLICATIONS
Beam-to-column connections, portal frames, mezzanine structures. HSFG bolts and Grade 8.8 hex sets.
Anchor bolts for column base plates, formwork tie systems, post-installed anchors in hardened concrete.
High-tensile bolts for bridge deck connections and bearing plate assemblies. Full MTCs provided.
Lifting inserts, cast-in anchors, and connection hardware for precast concrete and modular systems.
WHY CONTRACTORS CHOOSE CANCO
Material traceability from heat to shipment — required by most structural engineers and project QC protocols.
Long anchor bolts, oversized diameters, custom-length threaded rods made to your project drawing.
HDG coating to IS 2629 / ISO 1461 for exterior and marine-adjacent structural applications.
Packing lists, MTCs, and country-specific export documents for international project sites.
