Threaded stud for use with resin capsules or injection cartridges, where load is transferred through the bonded resin rather than mechanical expansion. This makes it the correct choice for close edge distances, reduced spacing, and cracked or lower-grade concrete where an expansion anchor would split the substrate.
Supplied in bulk to distributors, importers and hardware brands worldwide, including private-label packaging in the customer's own branding. Non-standard sizes and made-to-drawing variants are produced to order, with a material test certificate on every consignment.
| Product Type | Threaded anchor stud with 45° chisel point, supplied with hex nut and washer |
| Standards | DIN 976-1 threaded stud; ISO 898-1 (5.8 / 8.8); ISO 3506 (A2-70 / A4-70) |
| Material Grades | Carbon steel Grade 5.8 / 8.8, zinc plated or HDG; SS 304 (A2-70); SS 316 (A4-70) |
| Anchor Diameter Range | M8 to M30 |
| Drill Hole Diameter | 10 mm (M8), 12 mm (M10), 14 mm (M12), 18 mm (M16), 24 mm (M20), 28 mm (M24), 35 mm (M30) |
| Embedment Depth | 80 mm (M8) to 280 mm (M30) standard capsule depth; variable with injection resin |
| Max Fixture Thickness | 10 mm to 100 mm, set by stud length |
| Base Material Suitability | Concrete incl. close edge and spacing, solid masonry, natural stone; hollow masonry with mesh sleeves |
| Finish | Zinc plated (ISO 4042), yellow zinc, hot dip galvanized, passivated stainless |
| Custom Options | Flat, chisel or double-chisel ends; embedment depth marking; lengths; made to drawing |
| Certification | Material Test Certificate, EN 10204 3.1 |
| Packaging | Boxed in standard counts, bulk cartons, or private label to customer specification |
