Fixings for building services — ceiling anchors, threaded drop rods, pipe clamps and supports, and neoprene components for mechanical, plumbing, HVAC and fire-protection installations. Standard or made to your drawing, with test certificates on every shipment.
A services hanger, from the fixing in the slab down to the pipe or duct, and the product that fits each point.
Seismic bracing, heavy plant or a long unsupported run? Ask our engineers for a recommendation
Drawn from across the range — everything tagged to this application.
Sprinkler pipe supports usually have to meet NFPA 13 or the local fire code, and some projects require UL-listed or FM-approved hangers. Check what your fire consultant specifies — we'll confirm which of our products meet it before you order.
The lining stops pump and flow vibration travelling into the building as noise, lets the pipe move slightly as it heats and cools, and keeps copper or stainless pipe from touching a steel clamp. See the MEP, HVAC & Fire application guide
Not always. Pumps, fans and water hammer put repeated loads on overhead fixings, and a light-duty anchor may not be rated for that. Where the design calls for dynamic or seismic loading, use an anchor rated for it and re-check torque after commissioning.
Tell us what you're building and the standard you work to — we'll point you to the right product or make it to your drawing.
