Injection resin cartridge dispensed through a static mixing nozzle for anchoring threaded rod and rebar into concrete and masonry. Allows variable embedment depth and hole volume, which capsules cannot.
Supplied in bulk to distributors, importers and hardware brands worldwide, including private-label packaging in the customer's own branding. Non-standard sizes and made-to-drawing variants are produced to order, with a material test certificate on every consignment.
| Product Type | Two-component injection resin cartridge with static mixing nozzle |
| Standards | Technical Data Sheet and SDS (GHS / REACH); bond testing to ASTM E488 on request |
| Resin Type | Polyester (styrene-free) and vinylester; pure epoxy on request |
| Cartridge / Capsule Sizes | 300 ml coaxial (standard caulking gun); 345, 380 and 410 ml side-by-side (dual cartridge gun) |
| Compatible Stud Sizes | M8 to M30 threaded rod; rebar 8 mm to 32 mm; internal threaded sockets; mesh sleeves for hollow masonry |
| Gel Time | Approx. 6 min at +20 °C |
| Full Cure Time | Approx. 45 to 60 min at +20 °C, 3 hr at +5 °C, 24 hr at –5 °C (typical) |
| Base Material Suitability | Concrete, solid brick, hollow brick and block (with mesh sleeve), natural stone |
| Temperature Range | Installation –5 °C to +35 °C (cartridge at +5 °C min.); service –40 °C to +80 °C |
| Shelf Life | 12 months (polyester), 18 months (vinylester) from manufacture, stored at +5 °C to +25 °C |
| Certification | Batch test report, Technical Data Sheet, Safety Data Sheet |
| Packaging | Boxes of 12 cartridges with mixing nozzles; Canco-branded or private label |
