Threaded rod cut to specified lengths and supplied boxed or bundled in fixed quantities, so the distributor or installer does not have to cut from stock bar on site. Ends are deburred and chamfered so nuts start cleanly.
Supplied in bulk to distributors, importers and hardware brands worldwide, including private-label packaging in the customer's own branding. Non-standard sizes and made-to-drawing variants are produced to order, with a material test certificate on every consignment.
| Product Type | Expansion sleeve anchor with closed eye head, supplied pre-assembled |
| Standards | Canco standard design; ISO metric thread to ISO 965 (6g); pull-out testing to ASTM E488 on request |
| Material Grades | Carbon steel Grade 4.8 / 5.8, zinc plated; SS 304 (A2); SS 316 (A4) |
| Anchor Diameter Range | M6, M8, M10, M12 |
| Drill Hole Diameter | 10 mm to 20 mm, matched to sleeve outside diameter |
| Embedment Depth | 45 mm to 80 mm minimum, size dependent |
| Typical Use | Suspension and tie-off points for wire, chain, rod and signage; not for overhead lifting unless load-rated |
| Base Material Suitability | Concrete C20/25 and above, solid brick, natural stone; not for hollow block |
| Finish | Zinc plated (ISO 4042), yellow zinc passivated, hot dip galvanized, passivated stainless |
| Custom Options | Eye size, shank length, open hook variant, made to drawing |
| Certification | Material Test Certificate, EN 10204 3.1 |
| Packaging | Boxed in standard counts, bulk cartons, or private label to customer specification |
