Through-fixing anchor for mounting window frames, door frames, battens and sub-frames directly through the fixture into the base material in a single drilled operation. The nylon sleeve expands along its length as the screw drives, gripping hollow block, solid brick and concrete alike.
Supplied in bulk to distributors, importers and hardware brands worldwide, including private-label packaging in the customer's own branding. Non-standard sizes and made-to-drawing variants are produced to order, with a material test certificate on every consignment.
| Product Type | Nylon frame fixing — PA6 sleeve with pre-assembled countersunk or hex head screw |
| Standards | Canco standard design; pull-out testing to ASTM E488 on request |
| Material Grades | PA6 nylon sleeve; carbon steel screw (zinc plated), SS 304 or SS 316 screw |
| Anchor Diameter Range | 8 mm and 10 mm sleeve (6 mm and 7 mm screw) |
| Drill Hole Diameter | 8 mm or 10 mm, equal to sleeve diameter |
| Embedment Depth | Min. 50 mm in concrete; 70 mm in brick and hollow block |
| Max Fixture Thickness | 10 mm to 150 mm, set by sleeve length (60 mm to 200 mm) |
| Base Material Suitability | Concrete, solid brick, hollow brick, hollow concrete block, aerated concrete |
| Finish | Natural or grey nylon; screw zinc plated or stainless |
| Custom Options | Hex or countersunk screw, sleeve colours, lengths, private label packs |
| Certification | Polymer material report; MTC for screws, EN 10204 3.1 |
| Packaging | Boxed in standard counts, bulk cartons, or private label to customer specification |
