General-purpose sleeve anchor for medium-duty fixing into concrete, solid brick and natural stone. The full-length expansion sleeve reduces the risk of splitting near edges and in older substrates, making it a more forgiving choice than a wedge anchor for site conditions you cannot control.
Supplied in bulk to distributors, importers and hardware brands worldwide, including private-label packaging in the customer's own branding. Non-standard sizes and made-to-drawing variants are produced to order, with a material test certificate on every consignment.
| Product Type | Sleeve anchor — hex bolt, full-length expansion sleeve, cone and washer |
| Standards | Canco standard design; ISO metric thread to ISO 965 (6g); pull-out testing to ASTM E488 on request |
| Material Grades | Carbon steel Grade 4.8 / 5.8 / 8.8, zinc plated; SS 304 (A2); SS 316 (A4) |
| Anchor Diameter Range | M6 to M16; 1/4" to 3/4" |
| Drill Hole Diameter | Metric 10 mm to 25 mm, matched to sleeve OD; imperial equal to anchor diameter |
| Embedment Depth | 40 mm to 100 mm minimum, size dependent |
| Max Fixture Thickness | 5 mm to 100 mm, set by anchor length |
| Base Material Suitability | Concrete, solid brick, natural stone; light-duty in block |
| Finish | Zinc plated (ISO 4042), yellow zinc passivated, passivated stainless |
| Custom Options | Hex bolt, hex nut, countersunk, round, hook and eye heads; lengths; made to drawing |
| Certification | Material Test Certificate, EN 10204 3.1 |
| Packaging | Boxed in standard counts, bulk cartons, or private label to customer specification |
