Glass or foil capsule containing pre-measured resin and hardener, inserted into the drilled hole and mixed by the spinning action of the stud as it is driven. Gives consistent, pre-dosed resin volume without a dispensing gun.
Supplied in bulk to distributors, importers and hardware brands worldwide, including private-label packaging in the customer's own branding. Non-standard sizes and made-to-drawing variants are produced to order, with a material test certificate on every consignment
| Product Type | Glass capsule (spin-in) chemical anchor — pre-dosed resin, hardener and quartz aggregate |
| Standards | Technical Data Sheet and SDS (GHS / REACH); bond testing to ASTM E488 on request |
| Resin Type | Vinylester (styrene-free) or polyester resin with dibenzoyl peroxide hardener |
| Cartridge / Capsule Sizes | M8, M10, M12, M16, M20, M24, M30 capsules |
| Compatible Stud Sizes | M8 to M30 chisel-point anchor studs; rebar 8 mm to 32 mm |
| Gel Time | Approx. 10 min at +20 °C; longer at low temperature |
| Full Cure Time | 20 min at +20 °C, 30 min at +10 °C, 1 hr at 0 °C, 5 hr at –5 °C (typical) |
| Base Material Suitability | Non-cracked concrete C20/25 to C50/60, natural stone; dry or damp holes |
| Temperature Range | Installation –5 °C to +40 °C; service –40 °C to +80 °C |
| Shelf Life | 12 to 18 months, stored at +5 °C to +25 °C, dry and out of sunlight |
| Certification | Batch test report, Technical Data Sheet, Safety Data Sheet |
| Packaging | Boxes of 10 capsules, bulk cartons, or private label |
