Wedge anchor for fixing into solid concrete, where the expansion clip is drawn up a tapered cone to lock against the hole wall. Supplied with nut and washer for through-fixture installation.
Supplied in bulk to distributors, importers and hardware brands worldwide, including private-label packaging in the customer's own branding. Non-standard sizes and made-to-drawing variants are produced to order, with a material test certificate on every consignment.
| Product Type | Wedge anchor (through-bolt) — threaded stud, expansion clip, nut and washer |
| Standards | Canco standard design; thread to ISO 965 / ASME B1.1; pull-out testing to ASTM E488 on request |
| Material Grades | Carbon steel Grade 5.8 / 8.8, zinc plated or HDG; SS 304 (A2); SS 316 (A4) |
| Anchor Diameter Range | M6 to M24; 1/4" to 1" |
| Drill Hole Diameter | Equal to anchor diameter (e.g. 10 mm for M10, 1/2" for 1/2") |
| Embedment Depth | 40 mm to 125 mm (1-1/8" to 5"), size dependent |
| Max Fixture Thickness | 5 mm to 200 mm, set by anchor length |
| Base Material Suitability | Solid concrete C20/25 to C50/60 and natural stone; not for brick or hollow block |
| Finish | Zinc plated (ISO 4042 / ASTM B633), mechanically galvanized (ASTM B695), hot dip galvanized, passivated stainless |
| Custom Options | Lengths, thread lengths, length-code head stamping, made to drawing |
| Certification | Material Test Certificate, EN 10204 3.1 |
| Packaging | Boxed in standard counts, bulk cartons, or private label to customer specification |
