Tie rod anchor assembly for ground anchoring, retaining structures and tie-back applications, combining a threaded bar with anchor plate and nut. Used where tensile load must be transferred into soil, rock or a concrete mass.
Supplied in bulk to distributors, importers and hardware brands worldwide, including private-label packaging in the customer's own branding. Non-standard sizes and made-to-drawing variants are produced to order, with a material test certificate on every consignment.
| Product Type | Tie rod / tie-back assembly — threaded bar, bearing plate, hex nut and washer |
| Standards | Bar to ISO 898-1 / ASTM A36; plates to EN 10025 / IS 2062; nuts to ISO 4032 / ASTM A563 |
| Material Grades | Mild steel S275 / IS 2062 E250, Grade 8.8, high-yield threaded bar; SS 316 |
| Anchor Diameter Range | M16 to M64; 5/8" to 2-1/2" |
| Drill Hole Diameter | Per geotechnical design — typically 75 mm to 150 mm grout hole for drilled tie-backs |
| Embedment Depth | Bond (fixed) length per geotechnical design; anchor-plate type for deadman installation |
| Bearing Plate | Square plates 100 × 100 mm to 300 × 300 mm, 10 mm to 40 mm thick, made to design |
| Base Material Suitability | Soil, rock, mass concrete, retaining walls and sheet pile walls |
| Finish | Self colour, hot dip galvanized (ISO 1461), bitumen or epoxy coated |
| Custom Options | Turnbuckles, couplers, domed nuts and washers for angled installation, made to drawing |
| Certification | Material Test Certificate, EN 10204 3.1 |
| Packaging | Bundled bars with boxed plates and nuts, or to customer specification |
